How Much Do Quartz Countertops Cost in Houston?

Quartz countertops in Houston typically cost about $55 to $140 or more per square foot installed, depending on the brand, the design, and the fabrication details. For a typical kitchen of 30 to 40 square feet, that works out to roughly $1,500 to $5,500 or more. These are general market estimates, not an H & E quote.

Your real number depends on your layout, so the rest of this guide covers what moves the price. Use it to read any quote you get, from us or anyone else.

How much do quartz countertops cost per square foot in Houston?

These are typical market estimates for quartz, covering material, fabrication, and installation:

• Entry-level quartz: roughly $55 to $75 per square foot. Simple solids and speckled patterns from lower-priced lines.
• Mid-range quartz: roughly $70 to $100 per square foot. A wider choice of patterns and veining.
• Top of the market: roughly $80 to $140 or more per square foot. Designer lines, including Cambria, and heavily veined designs sit here.

Two cautions. First, per-square-foot numbers are averages. Small jobs usually cost more per foot because a fabricator has to do the same templating, cutting, and setup no matter the size. Second, some shops quote the slab and the labor separately. Always ask whether a number is material only or fully installed.

What does a typical Houston kitchen cost?

Take a kitchen with about 30 to 40 square feet of countertop. Multiplying the ranges above gives these rough totals, which are illustrations and not real projects:

• Entry-level quartz: roughly $1,500 to $3,000
• Mid-range quartz: roughly $2,000 to $4,000
• Top-tier quartz: roughly $2,500 to $5,500 or more

An island, a waterfall end panel, or a deep overhang pushes you toward the top of those ranges or past it. A bathroom vanity top is much smaller. Most land somewhere between a few hundred dollars and about $1,000, in part because small jobs often carry a minimum charge.

Every job is different. We quote each job after we see the layout and measurements, and you're welcome to bring your measurements and cabinet plans to the showroom.

What makes a quartz quote go up or down?

The brand and the design

Lower-priced lines cost less than designer lines. Within any line, bold veining usually costs more than a simple solid, because those designs are pricier to make and harder to lay out without waste. Ask which price tier your slab sits in.

How many slabs your kitchen needs

This one surprises people. Many fabricators price by the slab you use, not just the square feet you cover. A kitchen that just barely needs a second slab can cost noticeably more than one that fits on a single slab. Ask how many slabs the quote assumes, and whether a small layout change would save one.

Long runs and large islands may also need seams. A good fabricator places seams where they're least visible. Ask where yours will go.

The edge profile

A simple eased or square edge typically costs the least. Ogee and other decorative edges take more machine and polishing time. Mitered edges that make the top look extra thick, and waterfall sides that run down to the floor, cost more because they add both material and labor.

Thickness

Many kitchens use 3 cm quartz. A 2 cm slab is thinner and usually needs plywood support or a built-up edge. Ask which thickness the quote assumes before you compare two prices.

Sink and cooktop cutouts

The sink decides the cutout, and an undermount sink takes more edge work than a drop-in. If you're also buying the sink, pick it before templating. Our sinks and vanities page covers the options.

Removal, plumbing, and backsplash

Taking out the old top, disconnecting plumbing, and any backsplash work are often priced separately from the stone. Ask what's included and what isn't.

What is different about pricing a quartz top in Houston?

Foundations and cabinets. Houston's clay soil moves, and older slab-on-grade homes can settle unevenly. Cabinets end up slightly out of level. Stone is rigid, so uneven cabinets show up as gaps or stress at seams. Level the cabinets before the template is made.

Humidity. Quartz is non-porous and doesn't need sealing, so moisture doesn't hurt the stone. It can hurt the cabinets under it. Check the floor of your sink base for swelling before you put new stone on top.

Heat. Quartz is made with resin, and high heat can mark or crack it. Use trivets for hot pans, which matters in a busy Houston kitchen.

Hurricane season. Slab shipments can slip. If you want a particular slab, ask what's in the yard today before you plan around it.

How does quartz price compare with granite and laminate?

Granite in the mid-range often overlaps with quartz on price, and some rarer granites cost more. The difference is upkeep: granite usually needs periodic sealing and quartz does not. Laminate costs far less than either, but it is a different class of surface with different wear. The best way to compare is to put slabs next to each other, which is easier in person than online.

How do you get a quartz quote you can compare?

Ask every shop the same questions:

1. Is this price installed? Does it include template, fabrication, delivery, and installation?
2. Which slab, thickness, and edge is it based on?
3. How many slabs, and where do the seams go?
4. Are sink and cooktop cutouts included?
5. Is old countertop removal included?
6. What happens if the cabinets aren't level at template time?

If you can bring measurements, cabinet plans, and photos, you'll get a much tighter number.

How can you keep the cost down without cutting corners?

• Fit the job to one slab when you can. Ask whether a small layout change, such as a shorter overhang or a different island size, saves a slab.
• Keep the edge simple. A plain eased or square edge looks clean and costs less than a decorative one.
• Keep the sink where it is. Moving plumbing adds cost outside the stone quote.
• Pick a slab that's in stock. Ask what's in the yard before you commit to a special order.
• Choose the tier that fits. A mid-range design can look great and cost less than a heavily veined top-tier slab.
• Price the whole project together. If the cabinets, counters, and sink are changing, one point of contact makes it easier to see the total.

Where can you see quartz slabs in Houston?

Colors look different under a showroom light, in a photo, and in your own kitchen. We keep a slab yard and showroom at 11768 Clay Rd, so you can see full slabs, not just small samples. Our stone countertop fabrication and install work is done in-house, so the same team that measures your kitchen handles the cutting and the install. If you're planning the whole room, our full kitchen remodel service covers the cabinets, counters, and sink under one point of contact.

Quartz Countertop Cost in Houston: FAQs

Is quartz cheaper than granite in Houston?

Not always. At the mid-range, the two can cost about the same, and some granites cost more than quartz. The bigger difference is maintenance. Granite usually needs periodic sealing. Quartz doesn't.

Why is one quartz quote so much higher than another for the same kitchen?

Usually one of a few things differs: the slab tier, the number of slabs, the edge profile, the thickness, or what's included, such as removal and cutouts. Put the quotes side by side and compare them line by line.

Does a waterfall island cost a lot more?

Yes. A waterfall adds slab material and labor to cut and match the pattern on the side panel. How much depends on the design, so ask for it as a separate line in your quote.

How much does a quartz vanity top cost?

Most land between a few hundred dollars and about $1,000 as a typical market estimate. The exact price depends on the size, the slab, the sink cutout, and the small-job minimum many fabricators apply.

Ready to price your project?

Bring your measurements, your cabinet plans, and any photos, and we'll walk through slabs and options with you. Call us at (832) 569-8899 or stop by the showroom Monday to Friday, 8 AM to 5 PM. We're closed Saturday and Sunday.